D-Link xStackTM DGS/DXS-3300 Series Switch User Manual


 
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
20
DGS-3324SRi:4#config serial_port baud_rate 115200
Command: config serial_port baud_rate 115200
Success.
DGS-3324SRi:4#
enable clipaging
Purpose Used to pause the scrolling of the console screen when the show
command displays more than one page.
Syntax
enable clipaging
Description This command is used when issuing the show command which
causes the console screen to rapidly scroll through several
pages. This command will cause the console to pause at the end
of each page. The default setting is enable.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable pausing of the screen display when the command output reaches the end of the page:
DGS-3324SRi:4#enable clipaging
Command: enable clipaging
Success.
DGS-3324SRi:4#
disable clipaging
Purpose Used to disable the pausing of the console screen scrolling at
the end of each page when the show command displays more
than one screen of information.
Syntax
disable clipaging
Description This command is used to disable the pausing of the console
screen at the end of each page when the show command
would display more than one screen of information.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable pausing of the screen display when show command output reaches the end of the page:
DGS-3324SRi:4#disable clipaging
Command: disable clipaging