Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
21
Success.
DGS-3324SRi:4#
enable telnet
Purpose Used to enable communication with and management of the
Switch using the Telnet protocol.
Syntax
enable telnet <tcp_port_number 1-65535>
Description This command is used to enable the Telnet protocol on the
Switch. The user can specify the TCP or UDP port number the
Switch will use to listen for Telnet requests.
Parameters
<tcp_port_number 1-65535>
−
The TCP port number. TCP
ports are numbered between 1 and 65535. The “well-known”
TCP port for the Telnet protocol is 23.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable Telnet and configure port number:
DGS-3324SRi:4#enable telnet 23
Command: enable telnet 23
Success.
DGS-3324SRi:4#
disable telnet
Purpose Used to disable the Telnet protocol on the Switch.
Syntax
disable telnet
Description This command is used to disable the Telnet protocol on the
Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable the Telnet protocol on the Switch: