Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
155
Command Parameters
enable admin
config admin local_enable <password 15>
Each command is listed, in detail, in the following sections.
enable authen_policy
Purpose Used to enable system access authentication policy.
Syntax
enable authen_policy
Description This command will enable an administrator-defined authentication
policy for users trying to access the Switch. When enabled, the
device will check the method list and choose a technique for user
authentication upon login.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable the system access authentication policy:
DGS-3324SRi:4#enable authen_policy
Command: enable authen_policy
Success.
DGS-3324SRi:4#
disable authen_policy
Purpose Used to disable system access authentication policy.
Syntax
disable authen_policy
Description This command will disable the administrator-defined authentication
policy for users trying to access the Switch. When disabled, the
Switch will access the local user account database for username and
password verification. In addition, the Switch will now accept the local
enable password as the authentication for normal users attempting to
access administrator level privileges.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable the system access authentication policy:
DGS-3324SRi:4#disable authen_policy
Command: disable authen_policy
Success.
DGS-3324SRi:4#