Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
8
3
COMMAND SYNTAX
The following symbols are used to describe how command entries are made and values and arguments are specified in this
manual. The online help contained in the CLI and available through the console interface uses the same syntax.
Note: All commands are case-sensitive. Be sure to disable Caps Lock or
any other unwanted function that changes text case.
<angle brackets>
Purpose Encloses a variable or value that must be specified.
Syntax
create ipif <ipif_name> <network_address> <vlan_name
32> {secondary | state [enable | disable]}
Description In the above syntax example, supply an IP interface name in the
<ipif_name> space, a VLAN name in the <vlan_name 32>
space, and the network address in the <network_address>
space. Do not type the angle brackets.
Example Command
create ipif Engineering 10.24.22.5/255.0.0.0 Design
[square brackets]
Purpose Encloses a required value or set of required arguments. One
value or argument can be specified.
Syntax
create account [admin | user] <username 15>
Description
In the above syntax example, specify either an admin or a user
level account to be created. Do not type the square brackets.
Example Command
create account admin
| vertical bar
Purpose Separates two or more mutually exclusive items in a list, one of
which must be entered.
Syntax
create account [admin | user] <username 15>
Description In the above syntax example, it is necessary to specify either
admin, or user. Do not type the backslash.
Example Command
create account admin