Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
213
Command Parameters
create access_profile [ethernet {vlan | source_mac <macmask 000000000000-ffffffffffff> |
destination_mac <macmask 000000000000-ffffffffffff> | 802.1p | ethernet_type}
profile_id <value 1-8>}
config access_profile
profile_id
<value 1-8> [add access_id [auto assign | <value 1-65535>] [ethernet {vlan
<vlan_name 32> | source_mac <macaddr 000000000000-ffffffffffff> |
destination_mac <macaddr 000000000000-ffffffffffff> | 802.1p <value 0-7> |
ethernet_type <hex 0x0-0xffff>} port <port> [permit {priority <value 0-7>
{replace_priority} | replace_dscp <value 0-63>} | deny | mirror] delete <value 1-
65535>]
create access_profile ip {vlan | source_ip_mask <netmask> | destination_ip_mask <netmask> | dscp |
[icmp {type | code} | igmp {type} | tcp {src_port_mask <hex 0x0-0xffff> |
dst_port_mask <hex 0x0-0xffff> | flag_mask [all | {urg | ack | psh | rst | syn | fin}]} |
udp {src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex 0x0-xffff>} | protocol_id
{user _mask <hex 0x0-0xffffffff>}]} profile_id <value 1-8>}
config access_profile
profile_id
<value 1-8> [add access_id [auto assign | <value 1-65535>] ip {vlan <vlan_name
32> | source_ip <ipaddr> | destination_ip <ipaddr> | dscp <value 0-63> | [icmp
{type <value 0-255> code <value 0-255>} | igmp {type <value 0-255>} | tcp
{src_port <value 0-65535> | dst_port <value 0-65535> | urg | ack | psh | rst | syn |
fin} | udp {src_port <value 0-65535> | dst_port <value 0-65535>} | protocol_id
<value 0 - 255> {user_define <hex 0x0-0xffffffff> }]} port <port> [permit {priority
<value 0-7> {replace_priority} | replace_dscp <value 0-63>} | deny| mirror] delete
<value 1-65535>]
create access_profile packet_content_mask {offset_0-15 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex
0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_16-31 <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_32-47 <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_48-63 <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_64-79
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>}
profile_id <value 1-8>}
config access_profile
profile_id
<value 1-8> [add access_id [auto assign | <value 1-65535>] packet_content
{offset_0-15 <hex0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> | offset_16-31 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> | offset_32-47 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff><hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> | offset_48-63 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_64-79 <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> <hex0x0-0xffffffff>} port <port> [permit {priority <value
0-7> {replace_priority} | replace_dscp <value 0-63>} | deny | mirror] delete <value
1-65535>]
create access_profile ipv6 {class | flowlabel | source_ipv6_mask <ipv6mask> | destination_ipv6_mask
<ipv6mask>}] profile_id <value 1-8>}
config access_profile
profile_id
<value 1-8> [add access_id [auto assign | <value 1-65535>] ipv6 {class <value 0-
255> | flowlabel <hex 0x0-0xfffff> | source_ipv6 <ipv6addr> | destionation_ipv6
<ipv6addr>} port <port> [permit {priority <value 0-7> {replace_priority}} | deny |
mirror] | delete <value 1-65535>]
Each command is listed, in detail, in the following sections.