Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
18
show module_info
Description This command is used to view information about the DEM-420X and
DEM-420CX uplink modules added to an xStack DGS/DXS-3300
series. Currently, only the DXS-3326GSR and the DXS-3350SR
members of the xStack DGS/DXS-3300 series have the capability to
add the optional DEM-420X or DEM-420CX module. Although the
DGS-3324SR and the DGS-3324SRi do not support the optional
module, information about the module can be viewed on these
switches if they are stacked with one of the switches that support the
optional module.
The following explains what is presented in the window:
Box ID – The ID of the switch in the switch stack.
Module Name – The name of the optional module. Currently,
switches in the xStack DGS/DXS-3300 series only support the DEM-
420X and the DEM-420CX optional modules.
Rev. – The hardware revision of the optional module.
Serial No. – The serial number associated with this particular
optional module.
Description – A brief description of the optional module including
port count and module type.
Parameters None.
Restrictions None.
Example usage:
To view information concerning the DEM-420X optional module added to an xStack DGS/DXS-3300 series switch.
DGS-3324SRi:4#show module_info
Command: show module_info
Box Module Name Rev. Serial Description
ID No.
------ ------------------ ------- --------- -------------------------------------------
1 DEM420X 2A1 123456789 2-Port 10GE XFP Uplink Module
2 DEM420CX 1A1 123454567 2-Port 10GE CX4 Uplink Module
3 - - - -
4 - - - -
5 - - - -
6 - - - -
7 - - - -
8 - - - -
9 - - - -
10 - - - -
11 - - - -
12 - - - -
DGS-3324SRi:4#
show serial_port
Purpose Used to display the current serial port settings.
Syntax
show serial_port
Description This command displays the current serial port settings.