Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
208
DGS-3324SRi:4#show auth_session_statistics ports 1:16
Command: show auth_session_statistics ports 1:16
Port number : 1:16
SessionOctetsRx 0
SessionOctetsTx 0
SessionFramesRx 0
SessionFramesTx 0
SessionId
SessionAuthenticMethod Remote Authentication Server
SessionTime 0
SessionTerminateCause SupplicantLogoff
SessionUserName Trinity
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
show auth_statistics
Purpose Used to display the current authentication statistics.
Syntax
show auth_statistics {ports <portlist> | all]}
Description
The show auth_statistics command is used to display the current
authentication statistics of the Switch on a per port basis.
Parameters
ports <portlist> − Specifies a range of ports. The port list is specified by
listing the lowest switch number and the beginning port number on that
switch, separated by a colon. Then the highest switch number, and the
highest port number of the range (also separated by a colon) are
specified. The beginning and end of the port list range are separated by
a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies
switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch
1, port 3 and switch 2, port 4 − in numerical order.
all – Specifies that all ports will be viewed.
Restrictions None.
Example usage:
To display the current authentication statistics for port 16 of module 1: