Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
292
DGS-3324SRi:4#disable rip
Command: disable rip
Success.
DGS-3324SRi:4#
show rip
Purpose Used to display the RIP configuration and statistics for the
Switch.
Syntax
show rip {ipif <ipif_name 12>}
Description This command will display the RIP configuration and statistics for
a given IP interface or for all IP interfaces.
Parameters
ipif <ipif_name 12> − The name of the IP interface for which to
display the RIP configuration and settings. If this parameter is not
specified, the show rip command will display the global RIP
configuration for the Switch.
Restrictions None.
Example Usage:
To display RIP configuration:
DGS-3324SRi:4#show rip
Command: show rip
RIP Global State : Disabled
Update Interval : 30 sec.
Timeout Interval : 180 sec.
Garbage Collect Interval : 120 sec.
RIP Interface Settings
Interface IP Address TX Mode RX Mode Authen- State
tication
------------- ------------------ ---------- ------------- ---------- -----
System 10.41.44.33/8 Disabled Disabled Disabled Disabled
Total Entries : 1
DGS-3324SRi:4#