Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
328
To delete an OSPF host route:
DGS-3324SRi:4#delete ospf host_route 10.48.74.122
Command: delete ospf host_route 10.48.74.122
Success.
DGS-3324SRi:4#
config ospf host_route
Purpose Used to configure OSPF host route settings.
Syntax
config ospf host_route <ipaddr> {area <area_id> | metric
<value>}
Description This command is used to configure an OSPF host route settings.
Parameters
<ipaddr> − The IP address of the host.
<area_id> − A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
<value> − A metric between 1 and 65535 that will be advertised for
the route.
Restrictions Only administrator-level users can issue this command.
Usage Example
To configure an OSPF host route:
DGS-3324SRi:4#config ospf host_route 10.48.74.122 area 10.1.1.1 metric 2
Command: config ospf host_route 10.48.74.122 area 10.1.1.1 metric 2
Success.
DGS-3324SRi:4#
show ospf host_route
Purpose Used to display the current OSPF host route table.
Syntax
show ospf host_route {<ipaddr>}
Description This command will display the current OSPF host route table.
Parameters
<ipaddr> − The IP address of the host.
Restrictions None.
Usage Example:
To display the current OSPF host route table:
DGS-3324SRi:4#show ospf host_route
Command: show ospf host_route