Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
327
DGS-3324SRi:4#show ospf area
Command: show ospf area
Area ID Type Stub Import Summary LSA Stub Default Cost
-------------- ------------- ------------------------------------ -------------------
0.0.0.0 Normal None None
10.48.74.122 Stub Enabled Enabled
Total Entries: 2
DGS-3324SRi:4#
create ospf host_route
Purpose Used to configure OSPF host route settings.
Syntax
create ospf host_route <ipaddr> {area <area_id> | metric
<value 1-65535>}
Description This command is used to configure the OSPF host route settings.
Parameters
<ipaddr> − The host’s IP address.
<area_id> − A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
metric <value 1-65535> − A metric between 1 and 65535, which will
be advertised.
Restrictions Only administrator-level users can issue this command.
Usage Example
To configure the OSPF host route settings:
DGS-3324SRi:4#create ospf host_route 10.48.74.122 area 10.1.1.1 metric 2
Command: create ospf host_route 10.48.74.122 area 10.1.1.1 metric 2
Success.
DGS-3324SRi:4#
delete ospf host_route
Purpose Used to delete an OSPF host route.
Syntax
delete ospf host_route <ipaddr>
Description This command is used to delete an OSPF host route.
Parameters
<ipaddr> − The IP address of the OSPF host.
Restrictions Only administrator-level users can issue this command.
Usage Example