Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
116
create vlan
protocol-ipxEthernet2 - Using this parameter will instruct the
Switch to forward packets to this VLAN if the tag in the packet
header is concurrent with this protocol. This packet header
information is defined by Novell Ethernet II Protocol.
protocol-appleTalk - Using this parameter will instruct the
Switch to forward packets to this VLAN if the tag in the packet
header is concurrent with this protocol. This packet header
information is defined by the AppleTalk protocol.
protocol-decLAT - Using this parameter will instruct the
Switch to forward packets to this VLAN if the tag in the packet
header is concurrent with this protocol. This packet header
information is defined by the Digital Equipment Corporation
(DEC) Local Area Transport (LAT) protocol.
protocol–decOther - Using this parameter will instruct the
Switch to forward packets to this VLAN if the tag in the packet
header is concurrent with this protocol. This packet header
information is defined by the Digital Equipment Corporation
(DEC) Protocol.
protocol–sna802dot2 - Using this parameter will instruct the
Switch to forward packets to this VLAN if the tag in the packet
header is concurrent with this protocol. This packet header
information is defined by the Systems Network Architecture
(SNA) 802.2 Protocol.
protocol–snaEthernet2 - Using this parameter will instruct
the Switch to forward packets to this VLAN if the tag in the
packet header is concurrent with this protocol. This packet
header information is defined by the Systems Network
Architecture (SNA) Ethernet II Protocol.
protocol-netBios - Using this parameter will instruct the
Switch to forward packets to this VLAN if the tag in the packet
header is concurrent with this protocol. This packet header
information is defined by the NetBIOS Protocol.
protocol-xns - Using this parameter will instruct the Switch to
forward packets to this VLAN if the tag in the packet header is
concurrent with this protocol. This packet header information is
defined by the Xerox Network Systems (XNS) Protocol.
protocol-vines - Using this parameter will instruct the Switch
to forward packets to this VLAN if the tag in the packet header
is concurrent with this protocol. This packet header information
is defined by the Banyan Virtual Intergrated Network Service
(VINES) Protocol.
protocol-ipV6 - Using this parameter will instruct the Switch
to forward packets to this VLAN if the tag in the packet header
is concurrent with this protocol. This packet header information
is defined by the Internet Protocol Version 6 (IPv6) Protocol.
protocol–userDefined - Using this parameter will instruct the
Switch to forward packets to this VLAN if the tag in the packet
header is concurrent with this protocol defined by the user. This
packet header information is defined by entering the following
information:
<hex 0x0-0xffff> - Specifies that the VLAN will only
accept packets with this hexadecimal 802.1Q Ethernet
type value in the packet header.