Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
23
To disable HTTP:
DGS-3324SRi:4#disable web
Command: disable web
Success.
DGS-3324SRi:4#
save
Purpose Used to save changes in the Switch’s configuration to non-volatile
RAM.
Syntax
save {[log | all]|
Description This command is used to enter the current switch configuration into
non-volatile RAM. The saved switch configuration will be loaded into
the Switch’s memory each time the Switch is restarted.
Parameters
Entering just the save command will save only the Switch configuration
to NV-Ram.
log – Entering the log parameter will save only the log file to NV-RAM.
all – Entering the all command will save both the log file and the Switch
configuration to NV-RAM.
Restrictions Only administrator-level users can issue this command.
Example usage:
To save the Switch’s current configuration to non-volatile RAM:
DXS-3326GSR:4#save
Command: save
Do you want to change current box id from AUTO mode to STATIC mode? (y/n) n
Saving all configurations to NV-RAM… Done.
DXS-3326GSR:4#
NOTE: The DGS-3324SRi does not support a change in box mode from
Auto to Static.
reboot
Purpose Used to restart the Switch.
Syntax
reboot
Description This command is used to restart the Switch.