Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
246
Command Parameters
config sim [{[commander {group_name <groupname 64> | candidate] |
dp_interval <sec 30-90> | hold_time <sec 100-255>}
download sim_ms [firmware_from_tftp | configuration_from_tftp] <ipaddr>
<path_filename> {[members <mslist 1-32> | all}}
upload sim_ms [configuration_to_tftp | log_to_tftp] <ipaddr> <path_filename>
{[members <mslist 1-32> | all]}
Each command is listed, in detail, in the following sections.
enable sim
Purpose Used to enable Single IP Management (SIM) on the Switch
Syntax
enable sim
Description This command will enable SIM globally on the Switch. SIM features
and functions will not function properly unless this function is
enabled.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable SIM on the Switch:
DGS-3324SRi:4#enable sim
Command: enable sim
Success.
DGS-3324SRi:4#
disable sim
Purpose Used to disable Single IP Management (SIM) on the Switch.
Syntax
disable sim
Description This command will disable SIM globally on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable SIM on the Switch:
DGS-3324SRi:4#disable sim
Command: disable sim
Success.
DGS-3324SRi:4#