Filter
Top Products
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
297
show dvmrp
Purpose Used to display the current DVMRP settings on the Switch.
Syntax
show dvmrp {<ipif_name 12>}
Description The command will display the current DVMRP routing table.
Parameters
<ipif_name 12> − This parameter will display DVMRP settings for
a specific IP interface.
Restrictions None.
Example Usage:
To show DVMRP configurations:
DGS-3324SRi:4#show dvmrp
Command: show dvmrp
DVMRP Global State : Disabled
Interface IP Address Neighbor Timeout Probe Metric State
------------ --------------- --------------- ----- ------ -------
System 10.90.90.90/8 35 10 1 Disabled
Trinity 12.1.1.1/8 35 10 1 Enabled
Total Entries: 1
DGS-3324SRi:4#