Filter
Top Products
LBI-39224
3-85
Add
Choose the
Add
button to move a selected VMIM from the
Configurable Sites list box and "add" it to the Configured/Active Sites
list box where it can be selected for configuration. If upon adding a
VMIM, a configuration data file exists on the CEC/IMC Manager's
hard disk drive from a previous add and delete, it will be added to the
Configured/Active Sites list box with its configuration data file (with a
** prefix). This previous configuration may be modified, saved, and
sent as needed.
Modify
Choosing the
Modify
button will display the Audio Interface Type
dialog box, select the Audio Board option button, then choose
OK
.
The Site Channel Configuration dialog box will be displayed. (The
T1/E1 Interface Card is not supported for the VMIM.)
Delete
Choose the
Delete
button to remove ("delete") a selected configured or
unconfigured VMIM from the Configured/Active Sites list box to the
Configurable Sites list box. Configured-and-active VMIMs cannot be
"deleted." This delete function does not remove the channel
configuration files from the CEC/IMC Manager's hard disk drive.
Therefore, if the deleted VMIM is subsequently added back to the
Configured/Active Sites list box using the
Add
button, the previous
channel configuration is not lost (this configuration data must be re-
saved in the Site Channel Configuration dialog box before it can be
resent to the CEC/IMC).