Filter
Top Products
LBI-39224
3-177
– choosing the Program LRIM button (changed data must be
saved to disk prior to programming).
A "No" indicates the module is NOT programmed, a module is "de-
programmed" (deleted) by choosing the Delete Mod button in the
Logging Recorder Configuration dialog box.
If the ID number of the entity to program is known, enter this ID in the
Manual ID text box to immediately select that entity without having to
scroll through what may be a rather lengthy list in the above drop-down
list box.
OK
Choose the OK button to program the selected module and return to the
Logging Recorder Configuration dialog box. Choosing OK does not
save or send the module programming data.
Cancel
Choose the Cancel button to return to the
Logging Recorder Configuration dialog box without making any
changes to the selected module.
3.15.2 Save and Send LRIM Module Configurations
After a module has been edited in the LRIM Module Edit dialog box,
the new configuration must be saved to the CEC/IMC Manager hard
disk before programming the CEC/IMC MOM.
Summation will occur if two or more modules have been
assigned the same channel number. If you do not desire
summation, assign each module a unique channel number
(between 1 and 32).
Save
Choose the Save button to save the selected module configurations—
only modified modules are saved—to the CEC/IMC Manager hard disk,
choosing Save does not reprogram the LRIM.
NOTE