Filter
Top Products
LBI-39224
3-136
be changed at the CEC/IMC. Input and output signal levels are set to 0
dBm, ALC is always disabled, and channel signaling is always off. The
remaining channel parameters are configured from the
DVIM Channel Configuration dialog box, Figure 33. Only those
DVIMs which were selected in the DVIM Channel Configuration List
dialog box are available for channel configuration. Select the desired
DVIM(s) to configure from the Configured/Active DVIM list, or add
the desired DVIM(s) from the Configurable DVIM list, if not already
listed. Choose Modify to display the DVIM Channel Configuration
dialog box. The selected DVIMs are displayed in a list box at the top
center of the dialog box.
Figure 33 DVIM Channel Configuration Dialog Box
Help
Choose the Help button to access the Help function. (Help is also
available by pressing the F1 key.)
View Current CEC/IMC Manager Channel Configuration
The upper list box in the DVIM Channel Configuration dialog box,
labeled "CEC/IMC Manager," displays the current channel
configurations stored on the CEC/IMC Manager hard disk for the
currently selected DVIM. As the edit fields above this list box are
modified for a selected channel, the changes will appear also in this list
box for the selected channel.
View Current CEC/IMC Channel Configuration
The lower list box in the DVIM Channel Configuration dialog box,
labeled "CEC/IMC," displays the current channel configurations stored
at the CEC/IMC for the currently selected DVIM. Information within