Filter
Top Products
LBI-39224
3-66
available PIMs may be selected at one time for modification in the
Site Channel Configuration dialog box. All selected PIMs in this list
will also be included in the "Save As…" dialog box that is accessed
from the Site Channel Configuration dialog box or the
T1/E1 Digital Site Configuration dialog box. If necessary, refer to
Configured/Active Sites Prefix Definitions, Table 1, on page 3-25 for
an explanation of the prefixes.
Add
Choose the Add button to move a selected PIM from the Configurable
Sites list box and "add" it to the Configured/Active Sites list box where
it can be configured. If upon adding a PIM, a configuration data file
exists on the CEC/IMC Manager's hard disk drive from a previous add
and delete, the site will be added to the Configured/Active Sites list box
with its configuration data file (with a ** prefix). This previous
configuration may be modified, re-saved and sent as needed.
Modify
Choose the Modify button to display the Audio Interface Type dialog
box, select either Audio Board or T1/E1 Interface as required by
clicking the appropriate option button. Selecting Audio Board will
activate the Site Channel Configuration dialog box, selecting T1/E1
Interface will activate the T1/E1 Digital Site Configuration dialog
box. These options are discussed in detail in subsequent sections.
Delete
Choose the Delete button to remove ("delete") a selected configured or
unconfigured site from the Configured/Active Sites list box to the
Configurable Sites list box. Configured-and-active sites cannot be
"deleted." This delete function does not remove "site" channel
configuration files from the CEC/IMC Manager's hard disk drive.
Therefore, if the deleted "site" is subsequently added back to the
Configured/Active Sites list box using the Add button, the previous
channel configuration is not lost (this configuration data must be re-
saved in the Site Channel Configuration dialog box before it can be
resent to the CEC/IMC).
Close
Choose the Close button to exit the Site Channel Configuration List
dialog box and return to the CEC/IMC Manager main window. Any
"**" (unconfigured and unsaved) PIMs appearing in the