Filter
Top Products
LBI-39224
3-127
without saving (No), or cancel the Close command and remain in the
dialog box (Cancel).
3.11.5 C3 Modular/Desktop Console Configuration
A special configuration procedure must be performed to set-up each C3
Modular/Desktop console's Translator. This procedure configures the
console's module database stored in the Translator Controller Board.
Configurable parameters for each module are module type (trunked or
conventional), display type (alphanumeric or fixed), unselect speaker
number, and module present (yes or no). Each C3 Modular/Desktop
console can be equipped with up to sixty-four total modules.
C3 Modular/Desktop consoles are configured from the C3 Modular/
Desktop Console Configuration dialog box, Figure 30. From the
CEC/IMC Manager menu bar select Configure System /
Console Configuration / C3 Desktop to display the
C3 Modular/Desktop Console Configuration dialog box.
Figure 30 C3 Modular/Desktop Console Configuration Dialog Box
Help
Choose the Help button to access the Help function. (Help is also
available by pressing the F1 key.)
Configure Communication Modules
Select the console to configure from the list box at the top center of the
dialog box. Select a module from the list box in the center of the dialog