Filter
Top Products
LBI-39224
3-159
numbers representative of bold-face numbers in the tables are
displayed for a given max. conventional channels per CEC/IMC.)
Switch Number range = 33 – 48.
Channel Range
Range of conventional channels that current Switch Number is
allocated. Channel Range = 1 – 255; maximum of 64 sequential
channels per CEC/IMC.
Conventional Interface (Number)
CIA rack number that supports currently selected conventional
channel. This field is not displayed if the currently selected
channel is a remote conventional channel. Conventional Interface
range = 1 or 2.
CI Channel
Conventional interface (VMIM/CIA set) channel number of
currently selected conventional channel. For example,
conventional channel 33 typically uses channel 1 of the second
VMIM/CIA set, in which case "1" would be displayed. This field
is not displayed if the currently selected channel is a remote
conventional channel. CI Channel range = 1 – 32.
Local Conventional Channel Configuration
If the currently selected channel is a local conventional channel, the
following high-level channel parameters are displayed for editing
purposes. If the currently selected channel is a remote conventional
channel, this information is not applicable; therefore, it is not displayed.
Switch Site
This is the VMIM that provides the CIA rack with its CEC/IMC
interface (the VMIM that is actually connected to the CIA rack).
Changing the Switch Site for the currently selected channel will
also change the other thirty-one (31) channels within the same
VMIM/CIA set. This change will not become permanent for all
thirty-two (32) channels until a save and/or send is performed.
Switch Site range = 1 – 32. Default = 0 or the currently selected
VMIM for this 32-channel VMIM/CIA set (selected during
configuration of another channel within this VMIM/CIA set).
The VMIM selected must be actually connected (wired) to the CIA
rack, for example, if the currently selected local conventional
channel is interfaced by CIA rack 2, and CIA rack 2 is connected
to VMIM 10, "10" should be selected. Select the required VMIM
site assignment number from the drop-down list.