Filter
Top Products
Table 4. Configuration Parameter List - APPN Routing (continued)
Parameter Information
Parameter
Cache searches for (0-255) minutes
Valid Values
0 - 255
Default
8
Description
Specifies how many minutes the BN retains information in the multi-subnet search
cache once the search terminates.
Parameter
Maximum number of searches in cache
Valid Values
0 - 32765 (0=unlimited)
Default
0
Description
Specifies the maximum number of entries in the multi-network search cache. Once this
limit is reached, the oldest entries are discarded.
Note: The primary mechanism for deletion of these entries is the cache search time
value specified in cache searches for (0–255) minutes.
Parameter
Dynamic routing list updates
Valid Values
0 (none) - No dynamic entries are added.
1 (full) - All native border nodes, all adjacent non-native border and network nodes, and
nodes that know of similarly named destination LUs are added.
2 (limited) - All native border nodes, all adjacent non-native border nodes and network
nodes
with the same NETID
, and nodes that know of similarly named destination LUs
are added.
Default
2
Description
Indicates the degree to which, if any, that a BN can supplement configured routing list
data with topology data learned by the operational code. This supplemental data is not
saved in SRAM.
APPN Configuration Commands
86
MRS V3.2 Protocol Config Ref Vol 2