Filter
Top Products
Table 38. Configuration Parameter List - COS Mapping Table Configuration
Parameter Information
Parameter
COS mapping table name
Valid Values
Character string up to 20 characters in length, with no imbedded blanks. Mixed case
and special characters are allowed.
Default Value
Blank
Description
This parameter identifies a specific COS mapping table. It allows you to identify the
table for modification, listing, or deletion by the configuration software. It is not used by
the operational software. Up to 255 COS mapping tables may be configured depending
upon availability of configuration memory. Case is respected.
Parameter
Non-native NETID or CP name
Valid Values
A fully-qualified CP name with optional trailing wildcard. Legal characters for the CP
name are: A-Z, @, $, #, 0-9
The first character of the NETID part and of the CP name part must be non-numeric.
Any of the fully-qualified CP names may be terminated with a wildcard “*” character to
designate a range of CPs. For example:
v *
v NET1*
v NET1.LUA*
Default Value
Blank
Description
This parameter specifies a list of one or more non-native networks that this mapping
table applies to. This question is repeated until terminated with a null entry.
Notes:
1. Only a single entry among all the routing lists may have a standalone “*” . This will
match all non-native networks, and is known as the default routing list.
2. Any given CP name may not be duplicated in another COS mapping table.
3. Maximum number of CP names that may be specified:
v 2210 12x - not supported
v 2210 14x or 24x - 98
APPN Configuration Commands
Chapter 2. Configuring and Monitoring APPN 191