Filter
Top Products
Table 18. Configuration Parameter List - Port Configuration for ATM (continued)
Parameter Information
Parameter
Best Effort Indicator
Valid Values
Yes, No
Default Value
No
Description
This parameter indicates if a throughput guarantee is required on this SVC. If the value
of this parameter is
yes
, then VCCs associated with this interface will be allocated
based upon the available bandwidth.
Note: The following parameters are forward traffic parameters.
Parameter
Forward Traffic Peak Cell Rate
Valid Values
1 - 85% of line speed
Default Value
Port’s Default Effective Capacity/48
Description
This parameter indicates an upper bound on the cell transmission rate.
Parameter
Forward Traffic Sustained Cell Rate
Valid Values
1 - 85% of line speed
Default Value
Port’s Default Effective Capacity/48
Description
This parameter indicates an upper bound on the average cell transmission rate. You
cannot specify this parameter if you are using a Best Effort connection.
Parameter
Forward Traffic Tagging
Valid Values
Yes, No
Default Value
Yes
Description
This parameter indicates that cells that are nonconforming to cell loss priority 0 traffic
specification but are conforming to cell loss priority 1 traffic specification are marked
and allowed into the ATM network. You cannot specify this parameter if you are using a
Best Effort connection.
APPN Configuration Commands
Chapter 2. Configuring and Monitoring APPN 131