Filter
Top Products
This command removes a TN3270E implicit pool. You will be
prompted to enter values for the following parameters. The
parameter range will be shown in parentheses ( ). The parameter
default will be shown in square brackets [ ].
Table 46. Configuration Parameter List - Delete TN3270E Implicit
Parameter Information
Parameter
Pool name
Valid Values
A string of 1 to 8 characters:
v First character: A to Z
v Second to eighth characters: A to Z, 0 to 9
Default Value
None
Description
This parameter specifies the name of the LU pool to be deleted.
Parameter
Delete entire pool
Valid Values
YesorNo
Default Value
No
Description
This parameter specifies whether the entire pool or a specific entry is to be deleted.
Parameter
Station name
Valid Values
A string of 1 to 8 characters:
v First character: A to Z
v Second to eighth characters: A to Z, 0 to 9
Default Value
None
Description
This parameter specifies the name of the station to be deleted.
Syntax:
delete
map
This command removes a client IP address to LU name mapping.
You will be prompted to enter values for the following parameters.
The parameter range will be shown in parentheses ( ). The
parameter default will be shown in square brackets [ ].
APPN Configuration Commands
206
MRS V3.2 Protocol Config Ref Vol 2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|