Filter
Top Products
Ifc Indicates the interface number of the subnet.
State Indicates the state of the interface, ON or OFF.
Type Indicates the type of subnet: LAN, X25,
ESIS Indicates the state of the ES-IS protocol, enabled (Enb) or disabled
(Dis).
ISIS Indicates the state of the IS-IS protocol, enabled (Enb) or disabled
(Dis).
L2 Only
Indicates if the router is operating at level 2 only, yes (true) or no
(false).
Ext Dom
Indicates if the router is operating outside the IS-IS routing domain
(external domain).
Metric Indicates the cost of using this subnet.
EIH Indicates the interval at which ES hello messages are sent out over
the subnet.
IIH Indicates the interval at which IS hello message are sent out over
the subnet.
Example:
list subnet detailed
Interface Number [0]? 0
Detailed information for subnet 0:
ISIS Level 1 Multicast: 018002B000014
ISIS Level 2 Multicast: 018002B000015
All ISs Multicast: 009002B000005
All ESs Multicast: 009002B000004
Level 1 Priority: 64
Level 2 Priority: 64
ISIS Level 1 Multicast
Indicates the multicast address to use when transmitting and
receiving L1 IS-IS PDUs.
ISIS Level 2 Multicast
Indicates the multicast address to use when transmitting and
receiving L2 IS-IS PDUs.
All ISs Multicast
Indicates the multicast address to use when receiving ES hellos.
All ESs Multicast
Indicates the multicast address to use when transmitting IS hellos.
Level 1 Priority/Level 2 Priority
Indicates the router’s priority for becoming the designated router on
the LAN.
templates
Displays a list of templates defined on this router.
Example:
list template
Route Cir Name Template Name DTE Addr Call UserData
routetest2 temptest2 25 81
timers Displays the OSI/DNA V timer configuration (what is running on the router,
OSI, or DNA V).
DECnet V/OSI Configuration Commands (Talk 6)
322
MRS V3.2 Protocol Config Ref Vol 2