Filter
Top Products
Table 40. Configuration Parameter List - Set TN3270E (continued)
Parameter Information
Parameter
Keepalive type
Valid Values
0 None
1 Timing mark
2 NOP
Default Value
0
Description
This parameter specifies the Keepalive type.
A Keepalive type of
Timing mark
requires responses from the client within the amount
of time specified using the Timer parameter .
A Keepalive type of
NOP
specifies that the client will not send back a response to the
Keepalive message. Notification that the client is no longer there will come from TCP.
Parameter
Frequency
Valid Values
1 to 65535 seconds
Default Value
60
Description
This parameter specifies how often the Keepalive message is sent to the client.
Parameter
Timer
Valid Values
1 to 65536 seconds
Default Value
10
Description
This parameter sets the timer value to be used with the Keepalive function.
Parameter
Automatic logoff
Valid Values
YesorNo
Default Value
No
Description
This parameter specifies whether automatic logoff will be enabled.
APPN Configuration Commands
196
MRS V3.2 Protocol Config Ref Vol 2
|
|
|
|
|
||
||
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|