Filter
Top Products
Example:
ap2config>delete nfilter in
Interface # [0]? 1
Zone name []? Marketing
zfilter out
interface# zone name
Deletes a zone name filter from the output of the interface.
Example:
delete zfilter out
Interface # [0]? 1
Zone name []? Marketing
interface
Use this command to delete an interface. This is the only way to delete
zone names that have non-printing characters.
Example:
ap2config>delete interface 1
Disable
Use the disable command to disable AP2 on all interfaces or on a specified
interface, checksumming, filtering, APL/AP2 translation, or split horizon routing.
Syntax:
disable
ap2
checksum
interface...
nfilter in...
nfilter out...
zfilter in...
zfilter out...
split-horizon-routing...
ap2 Disables the AppleTalk Phase 2 packet forwarder for all interfaces.
Example:
ap2config>disable ap2
checksum
Specifies that the router will not compute the checksum in packets it
generates. The router usually checksums all packets it forwards. This is the
default.
Example:
ap2config>disable checksum
interface
interface#
Disables all AP2 functions on the specified network interface. The network
continues to remain available for all other protocols.
Example:
ap2config>disable interface 2
nfilter in
interface#
Disables, but does not delete, the input network filters on this interface.
AppleTalk Phase 2 Configuration Commands (Talk 6)
224
MRS V3.2 Protocol Config Ref Vol 2