Filter
Top Products
System ID Length
Selects the length of the domain ID portion of the NET. This length
must be the same for all routers in same domain.
Max Synonymous Areas
Selects the maximum number of level 1 areas that are serviced by
this router.
L1 LSP Buffer Size
Selects the buffer size of the level 1 LSPs and SNPs originated by
the router. Range is 512 to 1492. If the interface packet size is less
than what you configured here, OSI will not run, and the router
generates the ELS message ISIS.053.
L2 LSP Buffer
Selects the buffer size of the level 2 LSPs and SNPs originated by
the router. Range is 512 to 1492. If the interface packet size is less
than what you configured here, OSI will not run, and the router
generates the ELS message ISIS.053.
Max IS Adjacencies
Selects the total number of IS adjacencies allowed for all circuits.
This number is used to size the IS adjacency free pool.
Max ES Adjacencies
Selects the total number of ES adjacencies allowed for all circuits.
This number is used to size the ES adjacency free pool.
Max Areas in Domain
Selects the total number of areas in the routing domain. This
number is used to size the L2 routing table.
Max ESs per Area
Selects the total number ESs in any one area. This number is used
to size the L1 routing table.
Max Internal Reachable Addresses
Selects the number you are using to size the internal metric routing
table.
Max External Reachable Addresses
Selects the number you are using to size the external metric routing
table.
Max Link State Updates
Selects the number you are using to size the link state database.
network-entity-title
Configures the router’s NET. The NET consists of the router’s system ID
and area address.
Example:
set network-entity-title
Area-address [ ]
System-ID [ ]:
Area-address
Indicates one of area address portion of the router’s NET. It is
included as the first address in the router’s set of manual area
addresses. Each area address may be a maximum of 19 bytes.
System-ID
Defines the portion of the NSAP that identifies this specific router.
DECnet V/OSI Configuration Commands (Talk 6)
Chapter 10. Configuring and Monitoring OSI/DECnet V 325