Filter
Top Products
Received packet with bad NSAP length
Indicates that an ISO CLNP data packet was received with an incorrect
NSAP length.
Received packet with bad checksum
Indicates that an ISO CLNP data packet was received with a bad
checksum.
Received packet with bad version number
Indicates that an ISO CLNP data packet was received with an incorrect or
unsupported version number.
Received packet with bad type
Indicates that an ISO CLNP data packet was received with an incorrect or
unsupported type field.
Received packet with expired lifetime
Indicates that an ISO CLNP data packet was received with an expired
lifetime.
Received packet with bad option
Indicates that an ISO CLNP data packet was received with a bad optional
parameter.
Received packet with unknown destination
Indicates that an ISO CLNP data packet was received but could not be
routed. The routing table contains no entry for the destination.
Received packet with no segmentation permitted
Indicates that an ISO CLNP data packet was received that needed
segmentation. The segmentation permitted flag was not set.
Received data packet cannot be forwarded
Indicates that an ISO CLNP data packet was received but could not be
routed because of a handler error.
No buffer available to send error packet
An attempt to send an ISO CLNP error packet failed because of a lack of
system I/O buffers.
No route to send error packet
An attempt to send an ISO CLNP error packet failed because it could not
be routed.
Received OK CLNP packet
Indicates that an ISO CLNP data packet was received and passed error
checking.
Cannot forward error packet
Indicates that an ISO CLNP error packet could not be routed because of a
handler error.
ISO unknown initial protocol ID
Indicates that an ISO CLNP packet was received with an unknown or
unsupported initial protocol identifier.
Received error packet
Indicates that an ISO CLNP error packet was received for this router.
Received local data packet
Indicates that an ISO CLNP data packet was received with the destination
NSAP indicating one of the router’s NSAPs.
OSI/DECnet V Monitoring Commands (Talk 5)
332
MRS V3.2 Protocol Config Ref Vol 2