Filter
Top Products
Table 10. Configuration Parameter List - Node Level Traces (continued)
Parameter Information
Parameter
Locking
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, the trace
option causes the router trace facility to gather data about locks that were obtained and
released on processes in the APPN network node.
Parameter
Miscellaneous tower activities
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, the trace
option causes the router trace facility to gather data about miscellaneous activities
within the APPN network node.
Parameter
I/O to and from the system
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, the trace
option causes the router trace facility to gather data about the flow of messages
entering and exiting the APPN network node.
Parameter
Storage management
Valid Values
Yes, No
Default Value
No
Description
This parameter enables or disables this APPN trace option. When enabled, the trace
option causes the router trace facility to gather data about any shared memory that was
obtained and released by the APPN network node.
APPN Configuration Commands
104
MRS V3.2 Protocol Config Ref Vol 2