Filter
Top Products
Table 8. Configuration Parameter List - APPN Node Tuning (continued)
Parameter Information
Parameter
Maximum number of ISR sessions
Valid Values
10 to 7 500
Default Value
200
Description
This parameter specifies an estimate of the maximum number of intermediate session
routing sessions (ISR) expected to be supported by this router network node at any
one time.
This parameter is used in conjunction with the Maximum number of adjacent nodes
parameter by the automatic tuning algorithm to calculate the values for the Maximum
shared memory and Maximum cached directory entries tuning parameters.
This parameter is configurable using the Configuration Program only.
Parameter
Percent of adjacent nodes with CP-CP sessions using HPR
Valid Values
0 to 100%
Default Value
0 (none)
Description
This parameter specifies an estimate of the maximum number of adjacent EN and NN,
with CP-CP sessions using option set 1402 (Control Flows over RTP option set).
This parameter is configurable using the Configuration Program only.
Parameter
Maximum percent of ISR sessions using HPR data connections
Valid Values
0 to 100 percent
Default
0 percent
Description
This parameter specifies the largest percentage of ISR sessions that use ISR to HPR
mappings.
This parameter is configurable using the Configuration Program only.
APPN Configuration Commands
98
MRS V3.2 Protocol Config Ref Vol 2