Filter
Top Products
in square brackets [ ].
Table 48. Configuration Parameter List - Delete TN3270E Port
Parameter Information
Parameter
Port number
Valid Values
1 to 65536
Default Value
none
Description
This parameter specifies the port number to be added.
Syntax:
list
all
This command lists a TN3270E configuration.
Monitoring APPN
This section describes how to monitor APPN. It includes the following sections:
v “Accessing the APPN Monitoring Commands”
v “APPN Monitoring Commands” on page 209
Accessing the APPN Monitoring Commands
Use the following procedure to access the APPN monitoring commands. This
process gives you access to an APPN’s
monitoring
process.
At the OPCON prompt, enter talk 5.
After you enter the talk 5 command, the GWCON prompt (+) displays on the
terminal. If the prompt does not appear when you first enter configuration, press
Return again.
Enter protocol APPN For example:
* talk 5
+
+ protocol APPN
APPN Configuration Commands
208
MRS V3.2 Protocol Config Ref Vol 2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|