Filter
Top Products
Table 17. Configuration Parameter List - Port Configuration (continued)
Parameter Information
Parameter
Port name
Valid Values
A string of 1 to 8 characters, where the first character is alphabetic and the 2nd through
8th characters are alphanumeric.
Default Value
A unique unqualified name that is automatically generated.
The name will consist of:
v TR (token-ring)
v EN (Ethernet)
v DLS (DLSw)
v IP255
v ATM
v FR (frame relay)
v X25 (X.25)
v SDLC (SDLC)
v PPP (point-to-point)
v IP
followed by the interface number.
You can change the port name to a name of your choice.
Description
This parameter specifies the name representing this port.
Parameter
Enable APPN routing on this port
Valid Values
Yes, No
Default Value
Yes
Description
This parameter specifies whether APPN routing is to be enabled on this port.
Parameter
Support multiple PU
Valid Values
Yes, No
Default Value
No
Description
This parameter specifies whether the port will support multiple subarea.
APPN Configuration Commands
126
MRS V3.2 Protocol Config Ref Vol 2