Filter
Top Products
Table 23. Configuration Parameter List - Link Station - Detail (continued)
Parameter Information
Parameter
Adjacent node subnet affiliation
Valid Values
0 (native)
1 (non-native)
2 (negotiable)
Default Value
Default is taken from the equivalent port level parameter
Description
This parameter specifies whether the adjacent node is in this node’s native APPN
subnetwork or in a non-native APPN subnetwork. A value of
2
instructs the node to
negotiate at link activation time to determine whether the adjacent link station is native
or non-native.
Note: This question is asked only if the border node function is enabled on this node.
Table 24. Configuration Parameter List - Station Configuration for ATM
Parameter Information
Parameter
Virtual Channel Type
Valid Values
SVC, PVC
Default Value
SVC
Description
This parameter identifies the ATM channel type as switched virtual circuit (SVC) or
permanent virtual circuit (PVC).
Note: The following parameters are common for SVCs and PVCs.
Parameter
Destination ATM Address
Valid Values
A 40- hexadecimal character string
Default Value
None
Description
This parameter specifies the 20–byte string that comprises the entire destination ATM
address.
APPN Configuration Commands
Chapter 2. Configuring and Monitoring APPN 159