Filter
Top Products
FAX Basic Screen - (continued)
5-13
12 Reserve............................ The next transmission can be reserved during communication or
printing. Displayed during the transmission or printing process.
13 MEMORY......................... Displays remainder of memory used for the fax operation.
14 JOB LIST ......................... Displays a list of reserved documents. You can redial manually
from this screen.
15 Remote stn list ................. Displays registered remote destination list screen.
16 ORIGINAL MODE............ Displays the scan configuration screen. Set the following items
corresponding to the original to be sent.
• RADF: Cover + 2 sided, Two sided, One sided*
• Resolution: S-Fine, Fine*, Normal
• Quality: Photo, Text/photo, Text*
• Density: Auto*, LIGHTER, NORMAL, DARKER
• Verification Stamp
*initial settings at the time of purchase.
17 APPLICATION ................. Displays APPLICATION screen.
18 ENTRY............................. A screen is displayed where Abbr dial, Program dial, and other
setup conditions are registered.
19 STORE............................. Pressed if:
• you want to scan a multi-page document using the platen
glass.
• you want to scan a document using both the RADF and the
platen glass.
• you want to scan a large document or a document for which
the size is different.
20 off-hook............................ Press when you want to transmit/receive a fax manually. When
you press this key, a signal noise sounds.
21 Program ........................... Displays Program select screen.
Use of Control
Panel
First-Use
Settings
Useful
Functions
Wake-up
Screen
FAX Basic
Screen