Filter
Top Products
10-43
Relay Transmission Request
Relay transmission request is the bridging of transmissions to several remote stations via an
intermediate (relay) station. If the remote stations to which you intend to transmit are far, this
function allows you to cut down the communication costs. You can organize groups of stations,
each of which consists of one relay station and several remote stations.
>>> Specifications for Relay Tx Req <<<
• Relay Tx Req can be used only when the Relay Tx Req feature is enabled in the Key
Operator mode. For detail, see "Function Set" (p.14-33).
• We define the originating station as that which issues a relay request, the relay station
as that which relays transmissions, and the terminating stations as that which receive
and terminate communications.
• To use Relay Tx Req, a Relay Box No., relay password and destination group No. must
be defined at the relay station.
• If you intend to use your FK-102 Type-A as a relay station, define the Relay Box No.,
relay password and destination group No. of your station and give the information
defined to the originating station. For detail, see "Setting Relayed Transmission" (p.13-
28).
• Relay Tx Req can be used only when the relay station incorporates the F-code feature.
Functions incompatible with Relay Tx Req
Polled Tx, Polling Rx, Confiden.Tx, Bulletin, ID Tx
• Unavailable with the Internet Fax.
Original station
Toll call
Intermediate relay station
Local call
Terminating station
Terminating station
Opening the
Application Screen
Difference between Internet
Fax and Fax Functions
Application Functions
Ov er v iew
2 in 1
Transmission
Book
Transmission
Frame Erase
Transmission
Original Size
Set
Mixed Original
Folded Original
Long Original
Flip Side 2
ECM Off
Confidential
Communication
V34 OFF
ID
Transmission
Relay Transmission
Request
Program Dial
FAX