Filter
Top Products
15-36
Internet FAX Tx Error Report
An i-FAX tx error report is automatically printed when an E-mail cannot be correctly transmitted to
the server.
Automatic printout can be set to ON or OFF with "transmission result report (I-FAX tx error
report)" at [Report Output Set] of Key Operator mode. For detail, see "Report Output Set" (p. 14-
30).
REMOTE STATION: ...The following is shown.
• Name when the name is registered in the i-FAX entry list
• Mail address of the remote station
START:........................The time at which communication started is shown.
Pages: ......................... The number of original pages scanned is shown.
RESULT: .....................OK Shown when communication ended normally.
S-OK Shown when [CLEAR] or [STOP] is pressed to terminate
communication.
NG Shown when a communication error has occurred.
Busy Shown when unable to complete communication due to
the line being busy.
No ans Shown when the remote station being called did not
answer.
TEL Shown when there has been an incoming telephone call.
Cont. Shown when an error has occurred and the FK-102
Type-A has switched to error page redialing.
M-full Memory-full is shown when the FAX file memory became
full during reception and reception failed.
PW-OFF Shown when the power switch is turned off.
FIL-ER Indicated when an attached file of a format other than
TIFF is received.