Konica Minolta 7145 All in One Printer User Manual


 
13-28
Setting Relayed Transmission
The FK-102 Type-A provides the ability to relay transmission to multiple stations that use F-
codes.
For your FK-102 Type-A to serve as a relay station, a relay box number, relay password and des-
tination dial group to which information is to be distributed must be defined for your FK-102 Type-
A.
The procedures for registering relayed transmission to multiple stations, changing relayed trans-
missions, and deleting relayed transmissions are described below.
Relay box number:...................... One out of five boxes, 100-104, can be designated.
Relay password: ......................... Designate a 4-digit number.
Destination dial group number:... Designate one of the dial groups defined for your FK-102
Type-A.
The information defined must be given to the station (FAX) that will issue relay requests.
It is required that the destination dial group number you are going to define here must be
defined as a dial group number in advance. To define dial group numbers, see Setting
Dial Groups (p. 13-20).
For operation of relay request, see Relay Transmission Request (p. 10-43).
Scheme of Relayed Transmission to Multiple Stations
Originating station
Issues a relay request.
Relaying station
Transmits the same infor-
mation to multiple sta-
tions.
Terminating stations
Receives the information.
This originates a trans-
mission of FAX docu-
ment sent to the relaying
station, with a relay box
number and relay pass-
word designated.
The document sent from
the originating station
enters specified relay box
in the memory tempo-
rarily.
The document held in the
relay box is transmitted to
the destination group des-
ignated.
Receives the document
sent from the relaying sta-
tion.
DETAILS
FAX