Filter
Top Products
Setting Transmission Conditions - (continued)
6-11
This setting activates the automatic density adjustment function so that originals are
scanned at the detected density. Press LIGHTER or DARKER to select density that is lighter
or darker than density selected in Auto mode.
RADF
This is used to set the manner in which originals are scanned according to the type of original.
There are three types of RADF scanning methods. One sided is set at the time of purchase.
• Cover + 2 sided........................Press this when scanning two-sided originals having a
cover. Only the first page (cover) is scanned as a one-
sided document.
• Two sided.................................Press this when scanning two-sided originals.
• One sided.................................Press this when scanning one-sided originals.
Resolution
This is used to set the fineness at which originals are to be scanned. The following three set-
tings are available for Resolution. Fine is set at the time of purchase.
• S-Fine .......................................Press this when scanning originals containing espe-
cially fine graphics or text.
• Fine...........................................Press this when scanning originals containing small
graphics or text.
• Normal......................................Press this when scanning normal originals.
•
As originals are scanned with increasing fineness, the amount of data that is sent also
increases, and more time is required for transmission.
• When S-Fine has been selected and the receiving machine is not equipped with an S-
Fine mode, originals are sent at a resolution corresponding to the reception capability of
the receiving machine.
DETAILS
DETAILS
Simple FAX
Transmission
Placing the Original
on the Machine
Setting Transmission
Conditions
Selecting a
Remote Station
Sc anni ng
Tran smit ti ng
Reserving
Transmission
Manual Transmission
Cancelling
Transmission
Confirming Reserved
Do cum en ts
Confirming
Communication Results
Memo ry
Transmissions
Total Page Set
Timer
Transmission
International
Communica tion
Sender
Information