Filter
Top Products
Reception Recording - (continued)
7-12
• If the size of the paper on which the facsimile actually prints is smaller than that of the
paper selected at step 1, the document is printed in reduced size.
• If the direction of the paper on which the facsimile actually prints is different with that of
the paper selected at step 1, the document is automatically printed so that it can be output
appropriately rotated by a 90-degree angle.
• If you print mixed size documents, this process is executed on each page.
• If the paper sizes selected in step 1 and step 2 are set in several paper trays, the paper
tray used is selected according to the setting of the automatic paper size selection func-
tion. Refer to the "Instruction Manual (Copy Operations)" for more detailed information.
• If the required paper size is only set in the manual insertion tray, the document is printed
on the paper fed from the tray; however, if the automatic paper size selection function or
the automatic tray selection function is disabled on the tray, the tray is not selected.
• If 2 in 1 reception is set, A4R paper is selected when A5 paper is received, and B4 paper
is selected when B5 paper is received.
• Even if the page division is set to ON, the page will not be divided if the transmission/
reception mode is set as follows.
• [Rx feed tray (fix)] is set
• [minimum reduction rate] is 100%
• [2 sided reception] is set to [ON]
• [2 in 1 print] is set to [ON]
• [Rx print quantity set] is [ON]
• If no printable paper is set, a message asking you to set the printable paper appears.
• If [Rx Paper selection] is set to [Priority]:
The appropriate paper is selected among A4, B4 and A3. If it is not available, it is
recorded after being reduced to fit in closest size of paper.
• If [Rx Paper selection] is set to [Fix]:
The appropriate paper is selected among A4, B4 and A3. If it is not available, the mes-
sage stays appearing until the paper is loaded.
• If [Rx feed tray (fix)] is set to other than [Auto]:
It is recorded to fit in the size of the paper in the paper tray (except manual insertion
tray) that is set in [Rx feed tray (fix)].
• If [Rx Paper selection] is set to other than [Auto] and [Rx feed tray (fix)] is set to other
than [Auto]:
The setting in the [Rx feed tray (fix)] takes precedence.
DETAILS