Filter
Top Products
15-24
Relay Sync Transmit Result Report
This report is printed out automatically when relay is requested.
Automatic printout can be set to ON or OFF with [Relay Request Rx report] at [Report output set]
of Key Operator mode. For detail, see "Report Output Set" (p. 14-30).
REMOTE STATION: ...The name of the relay station.
START:........................The time at which communication started.
TIME:...........................The required time for the communication is shown.
Pages: .........................The number of pages transmitted.
RESULT: .....................OK Shown when communication ended normally.
S-OK Shown when the [CLEAR] or [STOP] is pressed to termi-
nate communication.
NG Shown when a communication error has occurred.
Busy Shown when unable to complete communication due to
the line being busy.
No ans Shown when the remote station being called did not
answer.
TEL Shown when there has been an incoming telephone call.
Cont Shown when an error has occurred and the FK-102
Type-A has switched to error page redialing.
M-full Memory-full is shown when the FAX file memory became
full during reception and reception failed.
PW-OFF Shown when the power switch is turned off.
REMARKS:..................RLY and Relay BOX no. are shown.