Filter
Top Products
Setting Transmission Conditions - (continued)
2-24
This setting activates the automatic density adjustment function so that originals are
scanned at the detected density. Press LIGHTER or DARKER to select density that is lighter
or darker than density selected in Auto mode.
RADF
This is used to set the manner in which originals are scanned according to the type of original.
There are three types of RADF scanning methods. One sided is set at the time of purchase.
• Cover + 2 sided........................Press this when scanning two-sided originals having a
cover. Only the first page (cover) is scanned as a one-
sided document.
• Two sided.................................Press this when scanning two-sided originals.
• One sided.................................Press this when scanning one-sided originals.
Resolution
This is used to set the fineness at which originals are to be scanned. The following three set-
tings are available for Resolution. Fine is set at the time of purchase.
• S-Fine .......................................Press this when scanning originals containing espe-
cially fine graphics or text.
• Fine...........................................Press this when scanning originals containing small
graphics or text.
• Normal......................................Press this when scanning normal originals.
•
As originals are scanned with increasing fineness, the amount of data that is sent also
increases, and more time is required for transmission.
• [S-Fine] cannot be selected when broadcasting to multiple addresses.
• When [S-Fine] is selected but the remote station has no function to receive the mail in the
[S-Fine] mode, the mail is not correctly printed on the remote station. If the reception
capability of the remote station is not known, select [Fine] or [Normal].
DETAILS
DETAILS