Filter
Top Products
6-39
Memory Transmissions
There are two ways to send documents with this machine.
The FK-102 Type-A is initially set up for memory transmission. You can change the setting to
select quick memory transmission. To change settings, see "Transmission/Reception Mode
Options" (p. 14-25).
Memory Transmission
With Memory Transmission, all pages being sent are first scanned and stored in memory
before transmission. The document is automatically numbered by total page number, and
the images on the first page are shown on communication results report.
However, when a large number of pages are sent or when the images on the originals are
sent at high resolution, memory capacity may be exceeded due to the large amount of
data stored in memory.
The machine is automatically set to Memory Tx when any of the following procedures is per-
formed.
• Memory Tx set on the FAX Application screen.
• STORE has been pressed on the FAX Basic screen.
• When functions, such as 2 in 1 Tx, Book Tx, Frame erase Tx, Original size select,
Mixed size original in Special Original, Polled Tx and Timer Tx are set on the FAX
Application.
• Multiple remote stations have been designated.
• Documents are reserved to be transmitted.
Quick Memory Transmission
In this transmission method, a facsimile is sent as soon as each page is scanned. This
allows documents to be sent without exceeding memory capacity in the case of sending a
large number of pages.
DETAILS
HINTS
Simple FAX
Transmission
Placing the Original
on the Machine
Setting Transmission
Conditions
Selecting a
Remote Station
Sc anni ng
Tran smit ti ng
Reserving
Transmission
Manual Transmission
Cancelling
Transmission
Confirming Reserved
Do cum en ts
Confirming
Communication Results
Memo ry
Transmissions
Total Page Set
Timer
Transmission
International
Communica tion
Sender
Information