Filter
Top Products
DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
The 6400 Series Telephones
7-5The 6402 and 6402D Telephones
7
The user has access to a Feature card among the cards in the tray located under
the base of the telephone on which the system manager or the user can write the
features administered on each of the dial pad keys.
HOLD Button
The red HOLD button can be used to put a call on hold. When a call is on hold, the
red light associated with the HOLD button flashes.
REDIAL Button
TheREDIALbuttonisusedtoredialthelastnumbertheuserdialedfromthe
dial pad.
TRANSFER/TEST button
The TRANSFER button can be used in a couple ways: When the telephone is
off-hook, the user can press the TRANSFER button to transfer a call. When the
phone is on-hook, the user can test the lights on the telephone, and if the user has
a 6402D telephone, he or she can use the TRANSFER button to test the display.
(In the latter case, all the display segments fill in.)
CONF/RING Button
The CONFERENCE/RING button can be used in a couple ways: When the
telephone is off-hook, the user can use this button to set up a conference call with
five other people. When the phone is on-hook, the user can press this button to
select a personalized ringing pattern from among eight different patterns.
VOLUME Control button
The 6402 and 6402D telephones have a VOLUME “arrow” button on the front of
the set. This button has several functions. When the user is using the 1-way
speaker, the VOLUME button controls the volume of the speaker. When the user
is on a call using the handset, the VOLUME button controls the volume of the
handset. When the telephone is idle, the button controls the volume of the tone
ringer.
Message Light
The red Message light goes on when a message is left for the user. It goes off
when the user retrieves the message or when the message is erased.