Filter
Top Products
DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
The 7400 Series Voice Terminals
11-91The 7410D and 7410 Plus Voice Terminals
11
Features
Four Standard Fixed Feature Buttons
■ CONFERENCE or CONFERENCE/RING button
■ DROP or DROP/TEST button
■ TRANSFER button
■ HOLD button
Message Light
The Message light goes on when a message is left for the user. It goes off when
the user retrieves the message. On the 7410D voice terminal, the Message light is
green; on the 7410 Plus voice terminal, the Message light is red.
SELECT RING button (on 7410D)
On the 7410D (7410D01A) voice terminal has a SELECT RING button, which the
user can press along with the * key on the dial pad to select one of eight
personalized ringing patterns. The SELECT RING button along with the DROP
button is also used to perform a self-test of the lights and tone ringer on the voice
terminal. The SELECT RING button has a green status light associated with it.
SELECT button (on 7410 Plus)
The 7410 Plus (7410D02A) voice terminal has a SELECT button which can be
used in two ways:
■ When used with the CONFERENCE/RING button, the user can select a
personalized ring from eight ringing patterns.
■ When used with the DROP/TEST button, the user can initiate a self-test of
the lights and ringer on the voice terminal.
Call Appearance/Feature Buttons
The 7410D and 7410 Plus voice terminals have 10 call appearance/feature
buttons. Each of these buttons has a red in-use light and a green status light.
SPEAKER button (on 7410 Plus)
The 7410 Plus (7410D02A) voice terminal has a SPEAKER button which allows
the user to place calls while on-hook, to monitor calls on which the user has been
put on hold, or retrieve messages without lifting the handset. However, the
Speaker feature is for listening only. In order to speak to the other party, the user
must use the handset (the speaker must be off).