Lucent Technologies SYSTEM 85 Server User Manual


 
DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
The 500 and 2500 Series Telephones
14-9The 2500 Series Telephones
14
Physical Description
Dimensions
NOTE:
The following dimensions are approximate.
Width = 7 inches
Depth (front to back) = 8-3/4 inches
Height (maximum with handset in place) = 5-1/2 inches
Features
RECALL button
The 2500 MMGK is equipped with a Timed Recall button. This button provides
access to a second dial tone (if provided) without disconnecting the first call.
Other Physical Features
Handset
Most 2500 Series telephones are equipped with a G-type handset; however, some
newer versions have the hearing aid compatible K-type handset.
Dial pad
The 2500 Series telephone is equipped with a 12-button touch-tone dial pad.
Jacks
The 2500 Series telephone housing contains two jacks. The handset cord jack is
on the left side of the telephone. The line cord jack is on the back of the telephone.
The handset contains a jack for the handset cord. The 2514 CM contains a jack
for optional equipment.
Cords
Two cords are supplied with the 2500 Series telephone: a coiled 7-foot modular
handset cord and a 7-foot modular line cord. Optional longer cords are available:
a 12-foot handset cord, and 14-foot and 25-foot line cords.
Ringing
The 2500 Series telephone has a bell type ringer. The volume control on the desk
set is located on the bottom of the telephone. The volume control on the
wall-mounted set is located on the upper right side of the telephone.