Lucent Technologies SYSTEM 85 Server User Manual


 
DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
The 7100 Series Voice Terminals
8-25The 7104A Voice Terminal
8
SAVE/SEND button — used to save a dialed number, then call it again
PROGRAM button — used in recording numbers for one-touch dialing
DISPLAY button — used to display stored numbers
SPACE, PAUSE, and STOP buttons — used in recording numbers for
one-touch dialing
Eight dual function buttons
These buttons are divided into gray and blue halves and can be programmed for
one-touch dialing of sixteen frequently called numbers and/or system features.
Loudspeaker
The 7104A voice terminal has a built in loudspeaker for group listening and
on-hook dialing. The loudspeaker can be turned on and off with the SPEAKER
button.
Display
A 14-Character Liquid Crystal Display (LCD) provides the following displays. Each
display is local to the individual terminal.
Abbreviated Ring mode in effect Number programmed
Date Program mode in effect
Delayed Ring mode in effect Shift mode in effect
Display mode in effect Speaker on
Low Battery Time
Number called
Pull out tray
The 7104A voice terminal is equipped with a pull out tray with an instruction card
for voice terminal operation.
Other Physical Features
Handset
The 7104A voice terminal is equipped with an R-type handset.
Dial pad
The 7104A voice terminal has a 12-button touch-tone dial pad.
Jacks
The 7104A voice terminal housing contains two jacks. The handset cord jack is
just under the left side of the housing. (The handset contains a jack for the other
end of the handset cord.) The line jack is on the bottom center of the housing.