Lucent Technologies SYSTEM 85 Server User Manual


 
DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
The 8400 Series Voice Terminals
12-68The 8411 Voice Terminal
12
Figure 12-19. Button Numbering for Administering the 8411 Voice Terminal Connected
to a System 85 or a DEFINITY G2
Administering the Analog Adjunct
As noted in Table 12-22 and 12-23, the 8411D can be administered as itself
ONLY IF it is connected to a DEFINITY G3V4, Issue 3 (or later) switch. In Native
Mode the voice terminal is administered through a digital line circuit card with a
line number (with the usual three call appearances) assigned to the I-1 Channel.
A second line number can be administered through the same digital line card on
the I-2 Channel, but this line number can only be used for analog adjuncts
connected to the Analog Adjunct jack on the 8411. This Analog Adjunct is
assigned a private number, but can be used only for placing or terminating a call.
Volume
Shift Transfer
Test Conf
Mute Drop
Speaker Hold
1
23
456
789
ABC DEF
MNOJKLGHI
PQRS TUV WXYZ
*
O
#
NextPrevMenu Exit
If the 8411D is administered
The10call
3
4
5
6
7
8411D
8
9
10
11
12
Message
Ring
as a 7405D, administer the
12 softkey features on
“FEATURE BUTTON
ASSIGNMENTS” 14 through
25; administer the Normal
featureonButton#13.
If the 8411D is administered
as an 8410D, administer the
12 softkey features on
“SOFTKEY BUTTON
ASSIGNMENTS”
1 through 12.
appearance/feature
buttons are administered as
“BUTTON ASSIGNMENTS”
3 through 12.