DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
ISDN Voice Terminals
17-11The ISDN 7506 Voice Terminal
17
Loudspeaker
The 7506 display terminal has a built-in, programmable SPOKESMAN
loudspeaker. The SPEAKER button is used to turn the loudspeaker on and off.
The volume arrow buttons control the volume of the loudspeaker.
Speakerphone
The 7506 display terminal has a built-in, programmable speakerphone. The
SPEAKER button is used to turn the speakerphone on and off. The green light
next to the SPEAKER button goes on when the speakerphone is active. The
volume arrow buttons control the volume of the speakerphone.
MUTE button
Pressing the MUTE button mutes the handset or the speakerphone, whichever is
active. The red light next to the MUTE button goes on. The user is placed in a
listen-only mode.
Other Physical Features
Handset
The 7506 is equipped with an R-type handset.
Dial pad
The 7506 has a 12-button touch-tone dial pad.
Jacks
The 7506 housing contains three jacks. The Handset jack is located on the bottom
of the 7506 terminal. The Line jack is located on the back of the 7506 terminal.
The Adjunct jack, used for connection to the optional adjuncts, is located on the
bottom of the terminal. If the optional ADM is provided, there is an EIA RS-232D
Interface connector provided on its back.
Cords
Two cords are supplied with the terminal: a coiled 9-foot modular handset cord
and a line cord. An optional 12-foot handset cord is available.
Ringing
The 7506 display terminal has electronic tone ringing with patterns that can be
selected by using the SELECT and CONFERENCE/RING buttons in sequence.
The volume is controlled by the volume arrow buttons.
Mounting Options
The 7506 display terminal comes equipped with a nonadjustable desk stand.