Filter
Top Products
Copyright
1999, Lucent Technologies
All Rights Reserved
Printed in USA
Notice
Every effort was made to ensure that the information in this book was
complete and accurate at the time of printing. However, information is
subject to change.
Your Responsibility for Your System’s Security
Toll fraud is the unauthorized use of your telecommunications system by
an unauthorized party, for example, persons other than your company’s
employees, agents, subcontractors, or persons working on your
company’s behalf. Note that there may be a risk of toll fraud associated
with your telecommunications system and, if toll fraud occurs, it can result
in substantial additional charges for your telecommunications services.
You and your system manager are responsible for the security of your
system, such as programming and configuring your equipment to prevent
unauthorized use. The system manager is also responsible for reading all
installation, instruction, and system administration documents provided
with this product in order to fully understand the features that can
introduce risk of toll fraud and the steps that can be taken to reduce that
risk. Lucent Technologies does not warrant that this product is immune
from or will prevent unauthorized use of common-carrier
telecommunication services or facilities accessed through or connected to
it. Lucent Technologies will not be responsible for any charges that result
from such unauthorized use.
Federal Communications Commission Statement
Part 15: Class A Statement.
This equipment has been tested and
found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses,
and can radiate radio-frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case the user will be required to
correct the interference at his own expense.
Part 68: Network
Registration Number.
This equipment is registered with the FCC in
accordance with Part 68 of the FCC Rules. It is identified by FCC
registration number xxx.
Part 68: Answer-Supervision Signaling.
Allowing this equipment to be operated in a manner that does not provide
proper answer-supervision signaling is in violation of Part 68 Rules. This
equipment returns answer-supervision signals to the public switched
network when:
• Answered by the called station
• Answered by the attendant
• Routed to a recorded announcement that can be
administered by the CPE user
This equipment returns answer-supervision signals on all DID calls
forwarded back to the public switched telephone network. Permissible
exceptions are:
• A call is unanswered
• A busy tone is received
A reorder tone is received
Canadian Department of Communications (DOC)
Interference Information
This digital apparatus does not exceed the Class A limits for radio noise
emissions set out in the radio interference regulations of the Canadian
Department of Communications.
Le Présent Appareil Nomérique n’émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la class A
préscrites dans le reglement sur le brouillage radioélectrique édicté par le
ministére des Communications du Canada.
Trademarks
5ESS, ACCUNET, AUDIX, CALLMASTER, CentreVu, DEFINITY,
DIMENSION, MERLIN, PassageWay, SPOKESMAN, TERRA NOVA, and
TransTalk are registered trademarks of Lucent Technologies.
CARBON COPY Plus is a trademark of Microcom Systems Inc.
E78 PLUS, CROSSTALK, and VT are registered trademarks of Digital
Equipment Corporation.
HAYES is a registered trademark of Hayes Microcomputer Products, Inc.
HYPERACCESS is a registered trademark of Hilgraeve Corporation.
IBM is a registered trademark of International Business Machines
Corporation.
Micro Channel is a trademark of International Business Machines
Corporation.
PROCOMM PLUS is a registered trademark of Datastrom Technologies.
ProLogix and TransTalk are trademarks of Lucent Technologies.
RELAY GOLD is a registered trademark of Microcom Systems, Inc.
SideKick is a registered trademark of Starfish Software, Inc.
SMARTMODEM 2400 and SMARTCOM are trademarks of Hayes
Microcomputer Products, Inc.
Ordering Information
Call: Lucent Technologies BCS Publications Center
Voice 1 800 457-1235 International Voice 317 322-6791
Fax 1 800 457-1764 International Fax 317 322-6699
Write: Lucent Technologies BCS Publications Center
2855 N. Franklin Road
Indianapolis, IN 46219
Order: Document No. 555-015-201
Issue 11, December 1999
You can be placed on a standing order list for this and other documents
you may need. Standing order will enable you to automatically receive
updated versions of individual documents or document sets, billed to
account information that you provide. For more information on standing
orders, or to be put on a list to receive future issues of this document,
contact the Lucent Technologies BCS Publications Center.
For more information about Lucent Technologies documents, refer to the
Business Communications Systems Publications Catalog
, 555-000-010.
European Union Declaration of Conformity
Lucent Technologies Business Communications Systems declares that
the equipment specified in this document conforms to the referenced
European Union (EU) Directives and Harmonized Standards listed below:
EMC Directive 89/336/EEC
Low-Voltage Directive 73/23/EEC
Disclaimer
Intellectual property related to this product and registered to AT&T
Corporation has been transferred to Lucent Technologies Incorporated.
Any references within this text to American Telephone and Telegraph
Corporation or AT&T should be interpreted as references to Lucent
Technologies Incorporated. The exception is cross references to books
published prior to December 31, 1996, which retain their original AT&T
titles.
Heritage
Lucent Technologies — formed as a result of AT&T’s planned
restructuring — designs, builds, and delivers a wide range of public and
private networks, communication systems and software, consumer and
business telephone systems, and microelectronics components. The
world-renowned Bell Laboratories is the research and development arm
for the company.
Comments
To comment on this document, return the comment card at the front of the
document.
Acknowledgment
This document was prepared by Product Documentation Development,
Lucent Technologies, Holmdel, NJ 07733-3030.
The “CE” mark affixed to the equipment
means that it conforms to the above directives.